ZZY15830007369
- ZZY15830007369
- JIRAUSER771537
- Asia/Shanghai
- Yes
- No
MC-268519The Bug
The Directional Audio switching to OFF is no difference with switching to ON.
TheDirectional Audio switchingtoOFFis no difference with switching to ON.Directional Audio switching OFF same with ON issue
Directional Audio switchingOFFsame with ON issueDirectional Audio switching to OFF is same with ON issue
Directional Audio switching to OFF is same with switching to ON issue
In the Options - Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options - Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options - Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
Operating System:Windows 11
Launcher:Hello Minecraft! Launcher v3.5.5
In the Options
-Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds**
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
**
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
color: Color value is invalidIn the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
color: Color value is invalidIn the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
屏幕截图 2023-12-14 101345.png
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.In the Options > Music & Sounds
The Directional Audio switching to OFF is no difference with switching to ON.
The workaround don't work?
The crossbow is loading under the loaded state
ExampleTo Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.The crossbow is loading under the loaded state
-Some Way -To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
-Some Way -To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.The crossbow is loading under the loaded state
Some WayTo Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Some WayTo Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.The crossbow is loading under the loaded state
To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
My description might be not good, and I'm not English Speaker.
To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
My description might be not good, and I'm not English Speaker.
To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description mightbe not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1, then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1(If you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1(If you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1(If you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the Hotbar Slot 1(If you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(Its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the
HotbarSlot 1(If you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!- Load the crossbow again, and the crossbow is loading under the loaded state(
Its loading under the unloaded state at the previous version)!now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description may be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
mmm... Hello？
The crossbow is loading under the loaded state
Note: My description maybe not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
- Note: If you loaded the crossbow, you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), you hotbar slot 1 is still normal replaced.
now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note: If you loaded the crossbow,you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), you hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
- Note:
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), you hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note:(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), you hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note:
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), you hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because you hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note:
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), you hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, you hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good, and I'm not English Speaker.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(if you not selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(
if younot selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )you enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(executed at first time, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )You enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )You enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )You enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块内输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在上一个版本中它是正在未装填的状态下蓄力)！
注
(如果你已蓄力了该弩，)你输入命令 item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块内输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在上一个版本中它是正在未装填的状态下蓄力)！
注
(如果你已蓄力了该弩，)你输入命令 item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )You enter the command item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块内输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在上一个版本中它是正在未装填的状态下蓄力)！
注
(如果你已蓄力了该弩，)你输入命令 item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the previous version)!
Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块内输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在上一个版本中它是正在未装填的状态下蓄力)！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
？
hmm... nobody add the Affects Version?
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块内输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
再次将弩蓄力，而且弩正在已装填的状态下蓄力(在上一个版本中它是正在未装填的状态下蓄力)！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块内输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在
上一个版本24w07a中它是正在未装填的状态下蓄力)！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块
内输入命令 item replace entity @a container.0 with minecraft:crossbow 。- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在
上一个版本24w07a中它是正在未装填的状态下蓄力)！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在
上一个版本24w07a中它是正在未装填的状态下蓄力)！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在
上一个版本24w07a中它是正在未装填的状态下蓄力)！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块(在第一次被执行时，或该命令方块的类型不是循环)，你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力(在
上一个版本24w07a中它是正在未装填的状态下蓄力)！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1
(如果你未选择)，然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！- 再次将弩蓄力，而且弩正在已装填的状态下蓄力
(在上一个版本24w07a中它是正在未装填的状态下蓄力)！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。Reproduce示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
Hello?
The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
- The crossbow is loading under the loaded state
Note: My description might be not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
- The crossbow is loading under the loaded state
Note: My description mightbenot good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
- The crossbow is loading under the loaded state
Note: My description might not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.The Example To Reproduce:
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.The Example To Reproduce:
Enter thecommand/give @s minecraft:command_block to obtain the command block.- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。重现示例：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在
上一个版本24w07a中它是正在未装填的状态下蓄力）！注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use Other methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use Other
methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use Other Methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use Other Methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the
previous version24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use the Other Methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state at the 24w07a)!
Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use the Other Methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state
atthe 24w07a)!Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use the Other Methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state in the 24w07a)!
Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use the Other
Methods to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state in the 24w07a)!
Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方
法来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
The crossbow is loading under the loaded state
Note: My description might not good.You can use the Following Step to Reproduce(You might can also use the Other Ways to Reproduce):
- Enter the command /give @s minecraft:command_block to obtain the command block.
- Place the command block, and change the command block's type to Repeat.
- Enter the command item replace entity @a container.0 with minecraft:crossbow in the command block.
- Activate the command block( in any ways), Select the hotbar slot 1(If you haven't selected), then load and fire the crossbow, but you cannot fire, because your hotbar slot 1 is repeat forced replace with unloaded crossbow by the command block, but it showed loaded!
- Load the crossbow again, and the crossbow is loading under the loaded state(its loading under the unloaded state in the 24w07a)!
Note
(If you loaded the crossbow, )You enter the command /item replace entity @a container.0 with minecraft:crossbow or activate the command block(On the first executed, or the command block's type is not Repeat), your hotbar slot 1 is still normal replaced.Now unactivate the command block( in any ways), load the crossbow again, your hotbar slot 1 is no longer repeat forced replace with unloaded crossbow by the command block, so you can fire.
弩正在已装填的状态下蓄力
注：我的描述可能不好。你可以使用以下步骤来重现（你可能还可以使用其他方式来重现）：
- 输入命令 /give @s minecraft:command_block 以获得命令方块。
- 放置命令方块，并将命令方块的类型改为循环。
- 在命令方块中输入命令 item replace entity @a container.0 with minecraft:crossbow 。
- (以任意方式)激活命令方块，选择快键栏1（如果你未选择），然后将弩蓄力并发射，但你无法发射，因为你的快键栏1被命令方块循环强制替换为未装填的弩，但它显示已装填！
- 再次将弩蓄力，而且弩正在已装填的状态下蓄力（在24w07a中它是正在未装填的状态下蓄力）！
注
(如果你已蓄力了该弩，)你输入命令 /item replace entity @a container.0 with minecraft:crossbow 或激活该命令方块（在第一次被执行时，或该命令方块的类型不是循环），你的快键栏1仍然正常被替换。现在(以任意方式)取消激活命令方块，再次将弩蓄力，你的快键栏1不再被命令方块循环强制替换为未装填的弩，所以你能发射。
？？？