MC-272917Minecarts misaligned, not on rails as supposed to after reloading chunks, while the minecarts move
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no modifications
How to reproduce:
- build a rail station like this (see 2 screenshots or link
- https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1) timing of redstone repeaters need to be exact. The sticky pistons push the stripped oak logs, which act as "stoppers" and the minecarts do not overshoot the rail because of the right timing.
- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
Linked Issues
Low
Created Issue:
minecarts misaligned, not on rails as supposed to when reloaded while moving
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no mods
How to reproduce:
- build a rail station like this https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1
- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no mods
How to reproduce:
- build a rail station like this https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1
- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no mods
How to reproduce:
- build a rail station like this (see 2 screenshots or link
- https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1) timing of redstone repeaters need to be exact. The sticky pistons extend the ostripped oak logs as "stoppers" and the minecarts do not overshoot the rail.
- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no mods
How to reproduce:
- build a rail station like this (see 2 screenshots or link
- https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1) timing of redstone repeaters need to be exact. The sticky pistons extend the
ostripped oak logs as "stoppers" and the minecarts do not overshoot the rail.- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no mods
How to reproduce:
- build a rail station like this (see 2 screenshots or link
- https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1) timing of redstone repeaters need to be exact. The sticky pistons extend the stripped oak logs, which act as "stoppers" and the minecarts do not overshoot the rail because of the right timing.
- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no modifications
How to reproduce:
- build a rail station like this (see 2 screenshots or link
- https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1) timing of redstone repeaters need to be exact. The sticky pistons extend the stripped oak logs, which act as "stoppers" and the minecarts do not overshoot the rail because of the right timing.
- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
minecarts misaligned, not on rails as supposed towhenreloaded while movingminecarts misaligned, not on rails as supposed to after reloading chunks, while the minecarts move
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no modifications
How to reproduce:
- build a rail station like this (see 2 screenshots or link
- https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1) timing of redstone repeaters need to be exact. The sticky pistons
extendthe stripped oak logs, which act as "stoppers" and the minecarts do not overshoot the rail because of the right timing.- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
Dear community,
I would like to report a bug that’s about the mechanics of loaded minecarts.
In my world I am running a train consisting of 12 minecarts, as one unit.
They are running at consistent speed on a powered rail track, while I am flying 200 blocks away.
The issue:
As soon as I reload the chunks, where the minecarts run, I see them still running and have the same distance to each other(regarding the direction of travel), however some minecarts turn out to be misaligned, but still moving at the same speed. Partially the are minecarts, that are up to 1-2 blocks next to the rail.
I believe, that this is not supposed to happen. On the video Minecraft is running with fabric, but I also experimented in Minecraft vanilla without any mods, and the same issue occurred.
What I expected to happen was, that the minecarts should have run normally. In my video one minecart is misaligned from its rail.
version: vanilla 1.20.6
on a newly generated minecraft vanilla single-player world, no modifications
How to reproduce:
- build a rail station like this (see 2 screenshots or link
- https://youtu.be/c5YQTi5tZ24?si=gUK_9kt9zi-wg-h1) timing of redstone repeaters need to be exact. The sticky pistons push the stripped oak logs, which act as "stoppers" and the minecarts do not overshoot the rail because of the right timing.
- (set entity-distance to 50%, render distance as low as possible together with max shadow and simulation distance) not necessary
- build a rail track (powered rail, but in curves: normal rail)
- let the train(unit of multiple minecarts) depart from its station
- immediately fly away, until all chunks in the train area unload
- unload the chunks again after a time(at least 5 seconds)
- observe the moving minecarts(as I did in my uploaded video)
![[Mod] turbo](../../../data/avatars/users/92867.png){kind=small}
minecarts misaligned, not on rails as supposed to after reloading chunks, while the minecarts moveMinecarts misaligned, not on rails as supposed to after reloading chunks, while the minecarts move
duplicates
Would MC-2783 describe you're issue? I would also like to ask if this occurs on 1.21 Pre-Release 2?
I can confirm that MC-2783 describes this issue.
However I searched and I had not found anything regarding this issue at first.
I searched under "minecart misaligned" for example
Can confirm in 1.21 Pre-Release 2. And in this version it is also possible, after reloading the chunks in which the minecarts move, that they bug into each other, or are out of alignment. I observed, that one minecart was misaligned by one block further away from its leading minecarts in front. And after all pistons have pushed the stripped oak logs, all minecarts, also the misaligned one, were aligned properly again as if nothing happened.
Thank you for your report!
We're tracking this issue in MC-2783, so this ticket is being resolved and linked as a duplicate.
If you would like to add a vote and any extra information to the main ticket it would be appreciated.
If you haven't already, you might like to make use of the search feature to see if the issue has already been mentioned.
Quick Links:
📓 Bug Tracker Guidelines – 💬 Community Support – 📧 Mojang Support (Technical Issues) – 📧 Microsoft Support (Account Issues)
📓 Project Summary – ✍️ Feedback and Suggestions – 📖 Game Wiki
– I am a bot. This action was performed automatically! The ticket was resolved by one of our moderators, and I left this message to give more information to you.