Alvdevmin777
- Just_someone
- JIRAUSER624411
- America/Belem
- Yes
- No
MCPE-122009
I was making a base in my xbox one and then i used /fill to transform the bedrock in -y into air, but when i tried to make it in y-30 it said the blocks were in the void, i tested it in my cellphone the same thing happened
Edit: i noticed that apparently in new worlds or in a android phone, the bugs are in all -y.
I was making a base in my xbox one and then i used /fill to transform the bedrock in -y into air, but when i tried to make it in y-30 it said the blocks were in the void, i tested it in my cellphone the same thing happened
Edit: i noticed that apparently in new worlds or in a android phone, the bugs are in all -y.
I was making a base in my xbox one and then i used /fill to transform the bedrock in -y into air, but when i tried to make it in y-30 it said the blocks were in the void, i tested it in my cellphone the same thing happened.
Edit: i noticed that apparently in new worlds or in a android phone, the bugs are in all -y.
Iwas making a basein my xbox one and then i used /fill to transform the bedrock in -y into air, but when i tried to make it in y-30 it saidthe blockswere in the void, i tested it in my cellphone the samethinghappened.
Edit: i noticed that apparently innew worldsor in a android phone, the bugs are in all -y.hello i was making a base for my sister in my xbox one, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y, here are the steps i made:
1: create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: see the results.
hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y, here are the steps i made:
1: create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: see the results.
hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y, here are the steps i made:
1: create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: see the results.
hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y, here are the steps i made:
1: create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: see the results.
note: i tried to do it with other blocks and in other -y but it did not work
Yes i was with caves and cliffs enabled. I was trying to make the bedrock wall in already existing chunks to be air, it was all going well but when i tried to do it under -30 it didn't work, i tried in new chunks too, but it didn't work, it says the blocks are out of the world. Try doing this command in a command block: /fill ~ -31 ~ then after put a z or x number that is 200 blocks after and fill the other with ~ then put any block, this was my command /fill ~ -31 ~ 200 -31 ~ air i made this in the seed 406013242 (p.s sorry for writing too long).
hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y, here are the steps i made:
1: create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: see the results.
note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled
hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y, here are the steps i made:
1:
create a new world or log in a already created one;2: Execute a /fill command, this is how you do in the seed 406013242:
3:
see the results.
note: i tried to do it with other blocks and in other -y but it did not work;Note 2: I was with Caves and Cliffs enabled
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y, here are the steps i made:
1: Create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y
, here are the steps i made:1: Create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled
Observed results:
cannot
here are the steps i made:
1: Create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled
Observed results:
cannot
here
are the steps i made:1: Create a new world or log in a already created one;
2: Execute a /fill command, this is how you do in the seed 406013242:
3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how you do in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how you do in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how you do in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
/fill does not recognize blocks in y-30and under/fill sometimes does not recognize blocks in y-1 and under
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how
youdo in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how i have done in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how i have done in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how i have done in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Note 4:
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how i have done in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;
Note 3: the command can be done in a command block or not
Note 4:
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how i have done in the seed 406013242:
Step 3: See the results.
Note: i tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;Note 4: the image also shows the bug
Note 3: the command can be done in a command block or not
Note 4: the image also shows the bug
Hello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how i have done in the seed 406013242:
Step 3: See the results.
Note:
itried to do it with other blocks and in other -y but it did not work;Note 2: I was with Caves and Cliffs enabled;Note 4: the image also shows the bug
Note 3:
the command can be done in a command block or notNote 4:
the image also shows the bugHello i was making a base for my sister in my xbox one S, i was waiting for the negative y to come so i could finish the underground part, then in this beta i have seen the bedrock wall in old chunks, so i tried to use /fill to erase and transform it in air, it was all going well, but suddenly when i was at -31, something strange happened, it didn't work as expected.
It said that the blocks were outside the world, i tried again, but again it didn't work, so i relogged and it work only one time, then i tried to testin my phone where i have minecraft bedrock too, i tested it in a new world, but it didn't work the problem seem to have gotten worse at my phone as it didn't work at any -y.
Expected results:
(number) blocks filled.
Observed results:
cannot place blocks outside the world.
here is how to reproduce the bug:
Step 1: Create a new world or log in a already created one (make sure it has the Caves and Cliffs option enabled and it is in the 1.16.220.52 version);
Step 2: Execute a /fill command, this is how i have done in the seed 406013242:
Step 3: See the results.
Note: I tried to do it with other blocks and in other -y but it did not work;
Note 2: I was with Caves and Cliffs enabled;Note 4: the image also shows the bug
Note 3: The command can be done in a command block or not
Note 4: The image also shows the bug
I had this same issue for a very long time in my phone too but when i tried to do it in 1.16.220.51 it worked
I updated the report with more details