Netheferious
- Netheferious
- netheferious
- Europe/Stockholm
- Yes
- No
Cannot create biomes with customtree patternsCannot create biomes with custom configured_feature patterns
When uploading a world that includes a custom data pack with custom worldgen settings, worldgen settings are removed. To reproduce this, create a world and set up a data pack with custom worldgen setting that changes the generation patterns of any dimension (I discovered this using Starmute's Incendi
aworldgen datapack, but others I have tried have the same issue). Then, once you verify the data pack is working, upload the data pack to realms. All new worldgen data will be removed, often generating a cliff separating the blocks already generated from the new chunks generated on the realm.When uploading a world that includes a custom data pack with custom worldgen settings, worldgen settings are removed. To reproduce this, create a world and set up a data pack with custom worldgen setting that changes the generation patterns of any dimension (I discovered this using Starmute's Incendium worldgen datapack, but others I have tried have the same issue). Then, once you verify the data pack is working, upload the data pack to realms. All new worldgen data will be removed, often generating a cliff separating the blocks already generated from the new chunks generated on the realm.
Glow berries can generate on the floor of the cave in certain situations, creating buggy glow bushes. I believe this only occurs on narrow ledges but I could be wrong as occurrences are very rare.
Example:
Seed: -2048782000730431984
Location: 171 -21 24,
will add more laterHowever
If I may be so bold as to state my opinion, the floor of this biome is too dark, and leaving our fabulous axolotyl friends in such horrid darkness would be a travesty indeed. The areas where this bug occurs look so much nicer once you light up the berries, and I was excited when I noticed this at first because I thought you had added glow bushes. This bug inadvertently made some places more lively, and I think this bug should stay in a more clean form.
Glow berries can generate on the floor of the cave in certain situations, creating buggy glow bushes. I believe this only occurs on narrow ledges but I could be wrong as occurrences are very rare.
Example:
Seed: -2048782000730431984
Location: 171 -21 24,
will add more later. Please leave any you find in the comments.However
If I may be so bold as to state my opinion, the floor of this biome is too dark, and leaving our fabulous axolotyl friends in such horrid darkness would be a travesty indeed. The areas where this bug occurs look so much nicer once you light up the berries, and I was excited when I noticed this at first because I thought you had added glow bushes. This bug inadvertently made some places more lively, and I think this bug should stay in a more clean form.
Glow berries can generate on the floor of the cave in certain situations, creating buggy glow bushes. I believe this only occurs on narrow ledges but I could be wrong as occurrences are very rare.
Example:
Seed: -2048782000730431984
Location: 171 -21 24,will add more later. Please leave any you find in the comments.However
If I may be so bold as to state my opinion, the floor of this biome is too dark, and leaving our fabulous axolotyl friends in such horrid darkness would be a travesty indeed. The areas where this bug occurs look so much nicer once you light up the berries, and I was excited when I noticed this at first because I thought you had added glow bushes. This bug inadvertently made some places more lively, and I think this bug should stay in a more clean form.Glow berries can generate on the floor of the cave in certain situations, creating buggy glow bushes. I believe this only occurs on narrow ledges but I could be wrong as occurrences are very rare. Edit: It looks like this bug can occur on 1 block thick surfaces with a space below them where glow vines could normally generate.
Examples:
Seed: -2048782000730431984
Locations: 171 -21 24 in the open on a ledge
1278 7 1953 in the middle of a ravine. Not on a ledge but there is an open pocket 1 block below it.
693 18 3210 at the entrance to a smaller cavernHowever
If I may be so bold as to state my opinion, the floor of this biome is too dark, and leaving our fabulous axolotl friends in such horrid darkness would be a travesty indeed. The areas where this bug occurs look so much nicer once you light up the berries, and I was excited when I noticed this at first because I thought you had added glow bushes. This bug inadvertently made some places more lively, and I think this bug should stay in a more clean form.
Glow berries can generate on the floor of the cave in certain situations, creating buggy glow bushes. I believe this only occurs on narrow ledges but I could be wrong as occurrences are very rare.* Edit:* It looks like this bug can occur on 1 block thick surfaces with a space below them where glow vines could normally generate.
Examples:
Seed: -2048782000730431984
Locations: 171 -21 24 in the open on a ledge
1278 7 1953 in the middle of a ravine. Not on a ledge but there is an open pocket 1 block below it.
693 18 3210 at the entrance to a smaller cavernHowever
If I may be so bold as to state my opinion, the floor of this biome is too dark, and leaving our fabulous axolotl friends in such horrid darkness would be a travesty indeed. The areas where this bug occurs look so much nicer once you light up the berries, and I was excited when I noticed this at first because I thought you had added glow bushes. This bug inadvertently made some places more lively, and I think this bug should stay in a more clean form.
Glow berries can generate on the floor of the cave in certain situations, creating buggy glow bushes. I believe this only occurs on narrow ledges but I could be wrong as occurrences are very rare.* Edit:* It looks like this bug can occur on 1 block thick surfaces with a space below them where glow vines could normally generate.
Examples:
Seed: -2048782000730431984
Locations: 171 -21 24 in the open on a ledge
1278 7 1953 in the middle of a ravine. Not on a ledge but there is an open pocket 1 block below it.
693 18 3210 at the entrance to a smaller cavernHowever
If I may be so bold as to state my opinion, the floor of this biome is too dark, and leaving our fabulous axolotl friends in such horrid darkness would be a travesty indeed. The areas where this bug occurs look so much nicer once you light up the berries, and I was excited when I noticed this at first because I thought you had added glow bushes. This bug inadvertently made some places more lively, and I think this bug should stay in a more clean form.Glow berries can generate on the floor of the cave in certain situations, creating buggy glow bushes. I believe this only occurs on narrow ledges but I could be wrong as occurrences are very rare. Edit: It looks like this bug can occur on 1 block thick surfaces with a space below them where glow vines could normally generate.
Examples:
Seed: -2048782000730431984
Locations: 171 -21 24 in the open on a ledge
1278 7 1953 in the middle of a ravine. Not on a ledge but there is an open pocket 1 block below it.
693 18 3210 at the entrance to a smaller cavernHowever
If I may be so bold as to state my opinion, the floor of this biome is too dark, and leaving our fabulous axolotl friends in such horrid darkness would be a travesty indeed. The areas where this bug occurs look so much nicer once you light up the berries, and I was excited when I noticed this at first because I thought you had added glow bushes. This bug inadvertently made some places more lively, and I think this bug should stay in a more clean form.






My testing indicates to me that they will work in any biome, but only below sea level.
@Neko while this is true, this is clearly due to failure to remove the tag that allows it to rain when in certain biomes. It does not make sense for it to not rain in a technical biome, especially one designed for command and creative builds.
I have uploaded the console log as the txt file bug_log.txt
Yes. And it generated with the same issue.
It appears custom world generation is removed entirely when uploading world to realms.
@bugsbugsbugs this does not duplicate
MC-1133, as you do not need to center your hitbox inside the block to activate this. The only thing that is required is that any part of the bottom of your hitbox be inside the top part of the block.As bugsbugsbugs says, this is not a duplicate and is not resolved. You do not need to be centered on the block for this issue to occur and there are no other blocks this bug effects except dripleaf.
MC-1133does not apply to dripleafs at all, as they appear to have been coded to droop when any part of the bottom of your hitbox is inside the top of theirs.As I said when I posted this bug, I think this issue, while it does need to be fixed, actually improves the "biodiverse" effect of the biome and helps with the lighting quite a bit. The environment is a bit dark on the lower levels and glow bushes would be an elegant way to improve the biome.
This is a very severe, long-standing issue that has not been fixed yet. Why is this not assigned?
About 7 months ago, I as a realms user sent a message to Mojang support asking about this issue. I was told to be patient and that the issue was being looked into by Mojang. That was, it would seem, a lie, as there has been no progress made, no communication exchanged, and no assignment given to this issue. Mojang is not fixing this, and they are not saying why.
I would not be so angry about this if at least some reason was given. If there is a financial, technical, or logistical reason this can't be fixed I can accept that. But Mojang has not communicated about it, and I've been left staring at an issue with FIFTY-SIX votes and a confirmation status of Community Consensus. So, as custom world generation becomes the future of Minecraft, I, as an avid datapack maker jumping on the bandwagon, will be looking to take my buisness to a host who will actually let me play the entire game.