MC-7167Hopper's name doesn't change in its GUI after renamed in anvil
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.
What actually happen was:
The name of the hopper didn't changed in the GUI.
Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.
Examples below
Created Issue:
Hopper's name doesn't change after renamed in anvil
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
This is a bug that I was experiencing.What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
Hopper's name doesn't change in its GUI after renamed in anvil
If this bug was already submitted, don't blame me, I searched and nothing appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.+What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.+What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
Hopper bug 1.png
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.++Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.++Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.+
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.+
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
![[Mojang] Nathan Adams](../../../data/assets/gravatar/dinnerbone.png){kind=small}
[Mojang] Nathan AdamsFIXED IN 13w03a
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a "
MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...*If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a
Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...*If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a
Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.
This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a
Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...
If this bug was already submitted, don't blame me, I searched and nothing like this bug appeared.This is a bug that I was experiencing.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a
Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a
Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
THIS IS NOT FIXED IN 13w03a!!! ALTHOUGH IT SAYS THAT IS FIXED!!!
NOT FIXED IN 13w03a!!!
Bug fixes:
...
...
"MC-7167- Hopper's name doesn't change in its GUI after renamed in anvil"
...This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
g
This is a bug that I was experiencing in 13w03a.What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
gThis is a bug that I was experiencing in 13w03a.What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
They can be. chests dispeners. they can be renamed and Dinnerbone says that this is indeed a bug.
NOT FIXED IN 13w03a!!!
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a!!!*a
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a!!!*a
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a!!!*s
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
*NOT FIXED IN 13w03a!!!*s
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED IN 13w03a!!!
This is a bug that I was experiencing in 13w03a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED
IN 13w03a!!!This is a bug that I was experiencing in 13w0
3a.What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED!!!
This is a bug that I was experiencing in 13w05a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
NOT FIXED!!!
This is a bug that I was experiencing in 13w05a.
What I was expecting to happen was:
The name of the hopper should change after renamed in anvil.What actually happen was:
The name of the hopper didn't changed in the GUI.Steps to reproduce:
1-Get a Hopper.
2-Rename it to something else.
3-Plonk it down.
4-Note that the name in the GUI didn't change.Examples below
He (Dinnerbone) said he's gonna fix this bug.
YAY! DINNERBONE didn't FIXED THE BUG I FOUND!! I'm so sad. Although he said that he fixed it.
The crash report that used to reproduce the bug.
But still the hopper is the only one that doesn't change
I have found that Chests, Trapped Chests, Brewing Stands, Enchantment Tables, Dispensers, and Furnaces are the only interact-able blocks which display their new names. I've tested other blocks such as crafting tables and anvils but it didn't work. I'm not sure why it only applies to these specific blocks, but more blocks should be covered by this mechanic, at least for consistency.
Well you see, in the Crafting Table it represents as Crafting. So I think it's not good to change that, Anvils do not even have their own name in its GUI. But Hopper DO have its name on its GUI! For example: You want to change Hopper Transport #1 or #2 so it will help the map makers knowing what's what, and what's where.
Reopened.
Screenshots of 13w03a attached.
The wiki changelog says that "containers" can be renamed, which includes hoppers.