MCPE-163775Slime blocks and sticky pistons stick to bamboo saplings
Bamboo saplings stick to slime blocks and sticky pistons.
Please see the attached video.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR - Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling in front of the piston.
- Power and unpower the piston with a button.
Observation:
The bamboo sapling sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling don't stick to the slime block and sticky piston.
Linked Issues
Attachments1
Created Issue:
Bamboo saplings stick to slime blocks
Bamboo sapling stick to slime blocks
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west.
- Place slime blocks in front of the piston (about 11).
- Place bamboo saplings one block in front and one block down of the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Attachments6
Step 4.png
- Unresolved
- Open
- Unconfirmed
- Windows
- Windows 11 (KB5018418)
- 1.19.40
![[Mod] GoldenHelmet](../../../data/avatars/users/18951.svg){kind=small}
Bamboo saplings stick to slime blocksSlime blocks stick to bamboo saplings
Bamboo sapling stick to slime blocks
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west.
- Place slime blocks in front of the piston (about 11).
- Place bamboo saplings one block in front and one block down of the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west.
- Place slime blocks in front of the piston (about 11).
- Place bamboo saplings one block in front and one block down of the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
![[MCQA] Bartłomiej Słodkowski](../../../data/avatars/users/18941.svg){kind=small}
Slime blocks stick to bamboo saplings
See this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west.
- Place slime blocks in front of the piston (about 11).
- Place bamboo saplings one block in front and one block down of the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
![[Bot] Arisa](../../../data/avatars/users/43007.png){kind=small}
Slime blocks stick to bamboo saplings
See this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place slime blocks in front of the piston (about 11).
- Place bamboo saplings one block in front and one block down of the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
See this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place slime blocks in front of the piston
(about 11).- Place bamboo saplings one block in front and one block down of the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
See this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block down of the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
See this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block
down ofthe slime blocks.- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
See this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
See this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Outcome:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please look at the attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please
look atthe attachments for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
@Zunair
What do you mean?
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston.
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_Mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston
.- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you@Ju_Maofor reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over yhe pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over yhe pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over
yhe pushlimit or stay within it)- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and video for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Note:This may affect more blocks. I will test as soon as possible
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
This may affect more blocks. I will test as soon as possible
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Note:This may affect more blocks. I will test as soon as possible
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
{panel:title= Note:}
This may affect more blocks. I will test as soon as possibleSlime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
{panel:title=Note:}
This may affect more blocks. I will test as soon as possibleSlime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Note:This may affect more blocks. I will test as soon as possible
Slime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place some slime blocks in front of the piston (either enough for it to go over the pushlimit or stay within it)
- Place bamboo saplings one block in front and one block beneath (on the ground) the slime blocks.
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blocks pull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The piston can pull the slime blocks back, and they don't stick to the bamboo saplings.
Note:
This may affect more blocks. I will test as soon as possibleSlime blocks stick to bamboo saplings
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place
some slime blocksin front of the piston(either enough for it to go over the pushlimit or stay within it)- Place bamboo sapling
sone block in front and one block beneath (on the ground) the slime blocks.- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings, which makes it go over the push-limit which means the piston can't pull the slime blocks back.
OR
If it is under the Pushlimit, the slime blockspull the bamboo saplings with them
(Thank you @Ju_mao for reporting)
As seen in the attached video.
Expected result:
The
piston can pull the slime blocks back, and theydon't stick to the bamboo saplings.If have further information or other blocks that this applies to, please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
Slime blocks stick to bamboo saplings and candles
If have further information or other blocks that this applies to, please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information or other blocks that this applies to, please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information or other blocks that this applies to, please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information or other blocks that this applies to, please report it to me in the comments
Slime blocks stick to bamboo saplings and candlesPlease see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information
or other blocks that this applies to,please report it to me in the comments
Slime blocks stick to bamboo saplings and candlesPlease see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candlesPlease see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see this video: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see th
isvideo: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV
And the video in the attachments.
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power the piston.
- Unpower the piston
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power and unpower the piston.
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attachments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power and unpower the piston.
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
OR
If it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The slime block(s) don't stick to the bamboo sapling(s) and candle(s).
If you have further information please report it to me in the comments
Slime blocks stick to bamboo saplings and candles
Please see these two videos: https://1drv.ms/v/s!AsePcZIDfMeAgZIbBN9CjXtPcFEMBQ?e=PSWpzV,
Minecraft 2022-11-03 16-42-47.mp4
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attach
ments and videos for help):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one or more slime block(s) in front of the piston
- Place bamboo sapling(s) or candle(s) of any color one block in front and one block beneath (on the ground) the slime block(s).
- Power and unpower the piston.
Observation:
After you follow all the steps, you will see that the slime blocks stick to the bamboo saplings/candles, which makes it go over the push-limit which means the piston can't pull the slime blocks back as seen in the video linked above.
ORIf it is under the Pushlimit, the slime block(s) pull the bamboo sapling(s)/candle(s) along with them as seen in the attached video (By @Ju_mao).
Expected result:
The
slime block(s) don't stick to the bamboo sapling(s) and candle(s).If you have further information please report it to me in the comments
Slime blocks and sticky pistons stick to bamboo saplings and candles.
Please see the attached videos
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attached videos):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling and candle stick to the slime block or sticky piston.
In Preview 1.19.50.23 the candle sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling and candle don't stick to the slime block and sticky piston.
Slime blocks and sticky pistons stick to bamboo saplings and candles
If you have further information please report it to me in the comments
Slime blocks and sticky pistons stick to bamboo saplings and candles.
Please see the attached
videos
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attached video
s):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling and candle stick to the slime block or sticky piston.
In Preview 1.19.50.23 the candle sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling and candle don't stick to the slime block and sticky piston.
If you have further information please report it to me in the comments
Slime blocks and sticky pistons stick to bamboo saplings and candles.
Please see the video attached by @Ju_mao
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling and candle stick to the slime block or sticky piston.
In Preview 1.19.50.23 the candle sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling and candle don't stick to the slime block and sticky piston.
If you have further information please report it to me in the comments
Slime blocks and sticky pistons stick to bamboo saplings and candles.
Please see the video attached by @Ju_mao
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Slime block InconsistenciesSlime blocks have many inconsistencies with other blocks, like how all workstation accept for grindstones stick to them, shulker boxes don't stick to them while chests and barrels do, and they move many blocks that are not connected to them like lower-slabs. However I do not think this is the case with Bamboo saplings and candles, because they did not stick to slime blocks before.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling and candle stick to the slime block or sticky piston.
In Preview 1.19.50.23 only the candle sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling and candle don't stick to the slime block and sticky piston.
If you have further information please report it to me in the comments
Slime blocks and sticky pistons stick to bamboo saplings and candles.
Please see the video attached by @Ju_mao
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Slime block InconsistenciesSlime blocks have many inconsistencies with other blocks, like how all workstation accept for grindstones stick to them, shulker boxes don't stick to them while chests and barrels do, and they move many blocks that are not connected to them like lower-slabs. However I do not think this is the case with Bamboo saplings and candles, because they did not stick to slime blocks before.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling and candle stick to the slime block or sticky piston.
In Preview 1.19.50.23 only the candle sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling and candle don't stick to the slime block and sticky piston.
Slime blocks and sticky pistons stick to bamboo saplingsand candles
If you have further information please report it to me in the comments
Slime blocks and sticky pistons stick to bamboo saplings and candles.
Please see the video attached by @Ju_mao
Preview 1.19.50.23In Preview 1.19.50.23 this bug seems to be fixed for bamboo sapling but Not for candles.
Slime block InconsistenciesSlime blocks have many inconsistencies with other blocks, like how all workstation accept for grindstones stick to them, shulker boxes don't stick to them while chests and barrels do, and they move many blocks that are not connected to them like lower-slabs. However I do not think this is the case with Bamboo saplings and candles, because they did not stick to slime blocks before.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling
and candlestick to the slime block or sticky piston.In Preview 1.19.50.23 only the candle sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling
and candledon't stick to the slime block and sticky piston.Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling sticks to the slime block or sticky piston.
In Preview 1.19.50.23 it does not.
Expected result:
The bamboo sapling don't stick to the slime block and sticky piston.
is duplicated by
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
In 1.19.40, 1.19.41 and Preview 1.19.50.22 the bamboo sapling sticks to the slime block or sticky piston.
In Preview 1.19.50.23 it does not.
Expected result:
The bamboo sapling don't stick to the slime block and sticky piston.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling or candle underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling or candle in front of the piston.
- Power and unpower the piston with a button.
Observation:
The bamboo sapling sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling don't stick to the slime block and sticky piston.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling
or candleunderneath the slime block (on the ground)- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling
or candlein front of the piston.- Power and unpower the piston with a button.
Observation:
The bamboo sapling sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling don't stick to the slime block and sticky piston.
Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR
- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling in front of the piston.
- Power and unpower the piston with a button.
Observation:
The bamboo sapling sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling don't stick to the slime block and sticky piston.
Bamboo saplings stick to slime blocks and sticky pistons.
Please see the attached video.Steps to reproduce (please see the attached video):
- Place a sticky piston facing north, south, east or west one block above the ground.
- Place one slime block in front of the piston
- Place a bamboo sapling underneath the slime block (on the ground)
- Power and unpower the piston with a button.
OR- Place a sticky piston facing north, south, east or west on the ground.
- Place a bamboo sapling in front of the piston.
- Power and unpower the piston with a button.
Observation:
The bamboo sapling sticks to the slime block or sticky piston.
Expected result:
The bamboo sapling don't stick to the slime block and sticky piston.
![[Mod] OcelotOnesie](../../../data/avatars/users/43220.png){kind=small}
is duplicated by
Thank you for your report!
We're tracking this issue in MCPE-163775, so this ticket is being resolved and linked as a duplicate.
If you would like to add a vote and any extra information to the main ticket it would be appreciated.
If you haven't already, you might like to make use of the search feature to see if the issue has already been mentioned.
Quick Links:
📓 Bug Tracker Guidelines – 💬 Community Support – 📧 Mojang Support
📓 Project Summary – ✍️ Feedback and Suggestions – 📖 Game Wiki
– I am a bot. This action was performed automatically! The ticket was resolved by one of our moderators, and I left this message to give more information to you.
Thank you for your report!
We're tracking this issue in MCPE-163775, so this ticket is being resolved and linked as a duplicate.
If you haven't already, you might like to make use of the search feature to see if the issue has already been mentioned.
Quick Links:
📓 Bug Tracker Guidelines – 💬 Community Support – 📧 Mojang Support
📓 Project Summary – ✍️ Feedback and Suggestions – 📖 Game Wiki
Thank you for your report!
However, this issue has been temporarily closed as Awaiting Response.
Could you please provide a video showcasing the issue?
This ticket will automatically reopen when you reply.
Quick Links:
📓 Issue Guidelines – 💬 Mojang Support – 📓 Project Summary – 📧 Suggestions – 📖 Minecraft Wiki
@[MCQA] Bartłomiej Słodkowski I have added a video
Wow, looks good enough report from a user, shouldn't you try to reproduce it using the explanation mentioned?
This appears to be fixed for bamboo in Minecraft preview 1.19.50.23, but not for candles.
@KillerbeeNL Thank you, i have added it to the report
Jona van Lohuizen: please do not change the scope of your reports after they have been commented on or updated by staff. We will keep this ticket focused on bamboo. You may create a separate report for candles if you wish.
Also, please avoid making trivial edits and comments that are merely conversational or restating information that is already on the report. Comments on the bug tracker are for adding new information about the bug. If you want to discuss bugs and bug reports you may use the Mojira Discord or SubReddit. Finally, panels are reserved for the use of bug tracker staff when we see a need to give special focus to particular information or directions. I have removed the panels that you added. Please see our Bug Tracker Guidelines for additional guidance on how the bug tracker works and how you can contribute effectively.